Specification of Standard Solenoid Valve

 DOWNLOAD

STANDARD SOLENOID VALVE

Standard solenoid valves are used in domestic and professional appliances such as washing machines, dish washers and other electrically conducted mechanisms that operate with water.

Other specifications:

Valve body material: Nylon reinforced with glass-fiber.

Diaphragm material: EPDM, NBR, SILICONE or FPM.

Solenoid: Encapsulated in waterproof material, self-extinguishing.

Insulation class: CLASS H.

Coil connectors: Tab 6,3 mm, Rast 2.5, Rast 5; coil position optional.

Bracket: With M4 thread or bracket CANDY; bracket position optional.

Water flow rate: Up to 25 L/min unless it is restricted with flow restrictor.

Working pressure: From 0,2 - 10 bar.

Burst pressure: Min 80 bar.

Water hammer @ 6 bar: Less than 2 bar.

Operating rate: Tm 25°C 100% ED, Tm 90°C 3/5min, Tu 60°C.

Approved by: All major agencies world-wide.