Home > Water Solenoid Valve
Standard solenoid valves are used in domestic and professional appliances such as washing machines, dish washers and other electrically conducted mechanisms that operate with water.
Other specifications:
Valve body material: Nylon reinforced with glass-fiber.
Diaphragm material: EPDM, NBR, SILICONE or FPM.
Solenoid: Encapsulated in waterproof material, self-extinguishing.
Insulation class: CLASS H.
Coil connectors: Tab 6,3 mm, Rast 2.5, Rast 5; coil position optional.
Bracket: With M4 thread or bracket CANDY; bracket position optional.
Water flow rate: Up to 25 L/min unless it is restricted with flow restrictor.
Working pressure: From 0,2 - 10 bar.
Burst pressure: Min 80 bar.
Water hammer @ 6 bar: Less than 2 bar.
Operating rate: Tm 25°C 100% ED, Tm 90°C 3/5min, Tu 60°C.
Approved by: All major agencies world-wide.
Instruction
Rate voltage |
AC12V |
DC12V |
AC 24V |
DC24V |
AC110V |
AC220V |
|||||||
Coil resistance |
25Ω ±0.5Ω |
36Ω ±0.5Ω |
75Ω ±0.5Ω |
130Ω ±0.5Ω |
1.7KΩ ±0.5Ω |
4.75KΩ ±0.5Ω |
|||||||
Min current |
320mA |
300mA |
166mA |
166mA |
36mA |
18mA |
|||||||
Switch mode |
AC and DC continuous |
||||||||||||
Pulse wide |
≥30ms |
||||||||||||
Operating pressure |
0.02Mpa—1.0Mpa |
||||||||||||
Media temperature |
1℃--75℃ |
||||||||||||
Responding time |
Open ≤0.15s close≤0.5s |
||||||||||||
Pressure and flow rate diagram: |
|||||||||||||
Pressure (MPa) |
0.02 |
0.05 |
0.1 |
0.2 |
0.3 |
0.4 |
0.5 |
0.6 |
0.7 |
0.8 |
|||
Flow rate L/min |
4 |
9 |
14 |
18 |
23 |
28 |
32 |
36 |
40 |
43 |
Performance test
Strength test |
Static pressure 1.6MPa |
Withstand voltage pressure 1.2MPa/5min |
|||
No-load test |
Voltage 3.6V pulse width 30ms |
Permissible limiting voltage V*1.15 |
|||
High water pressure start and close |
At water pressure 0.8MPa,voltage DC 4.5V,pulse width 30ms,the solenoid valve can be started and closed normally |
||||
low water pressure start and close |
At water pressure 0.02MPa,voltage DC 4.5V,pulse width 30ms,the solenoid valve can be started and closed normally |
||||
Leakage upon high water pressure |
1.2MPa without leakage |
||||
Leakage upon low water pressure |
0.02Mpa leakage≤0.1ml/min |
||||
Electric strength |
Among conductive part, mounting hole and nonconductive metal, it can withstand 500V/50Hz,leakage current 0.75mA for 1 min without the breakdown |
||||
Insulation resistance |
The resistance between the charged part and nonconductive metal part tested by megohmmeter of 500V ≥20MΩ |
||||
Sealing test |
Static pressure |
Air |
High pressure |
1MPa |
|
Low pressure |
0.02MPa |
||||
Cold water |
High pressure |
1.2MPa |
|||
Low pressure |
0.02MPa |
||||
Hot cold |
High pressure |
0.8MPa |
|||
Low pressure |
0.02MPa |
||||
Service life |
≥1000000 cycles |
Requirements of working environment
Temp of working environment |
1℃--60℃ |
Permissible limiting pressure(water) |
≤1.2MPa |
Humidity of working environment |
35%-90% RH |
Mounting direction |
It is mounted in vertical. The inclination do not exceed 15 degrees |
Storage temp |
-5--80℃ no freezing state |
Storage humidity |
25%--95% RH |
FAQ
Q1: Are you trading company or manufacturer?
A: Yes, we are professional sensor sanitary wares manufacturer. We supply automatic hand dryer, automatic faucet, sensor urinal and toilet flusher. We have 2 factories in Fuzhou and Guangdong.
Q2: Can we place a trial order to do some test?
A: Sure, we have test our products for many terms, also you can do more tests. Generally, trial order is also welcomed. We would like more new customers to place trial order.
Q3: Do you accept OEM order?
A: Yes, of course. We provide various OEM services. You can customize your favorite models or design a new model with our professional technological support. Our R&D department and manufacturing department will do together to ensure the quality and on time delivery.
Q4: What is your terms of payment?
A: T/T, L/C at sight, and Western Union are available for our company.
Q5: What is your terms of delivery?
A: EXW, FOB, CFR, CIF, DDU.
Q6: How about your delivery time?
A: 35 days for container order, 7-10 days for sample order. The specific delivery time depends on the items and the quantity of your order.
Q7: Do you offer guarantee for the products?
A: Yes, we offer 2years warranty to our products.
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customer`s benefit.
2. We respect every customer as our friend sincerely and hope to do long-term business and make friends with you, no matter where you come from
Contact: Kevin Hou
Phone: 86-15067739232
Tel: 86-577-27880251
Email: kevin@trutes.com
Add: Lvao Industrial Park, Liushi Town, Wenzhou City, Zhejiang Province China 325604